• angi@angisrl.com

FLEXIBILE INSULATION TUBES





AT 7

The insulation tube AT7 is made with braiding in glass fibre at 100% of E type (electrotechnical use) and with a modified acrylic varnish. It is flexible and at the same time it is very resistant to high temperatures. It is used in the insulation and wirings of electric machines, motors, transformers and in all the application in which F insulation class is required.

Characterists

VALUE
Standard colour Yellow
Manufactured diameters 0,5 mm - 16 mm
Tolerance on diameters + 0,3 /-0 mm
Dielectric strength 2.500 Volt
Insulation class F (155°C)


AT 9

The insulation tube AT9 is made with braiding in glass fibre at 100% of E type (electrotechnical use) and with silicone elastomer. It is flexible and at the same time it is very resistant to high temperatures. It is used in the insulation and wirings of electric machines, motors, transformers and in all the application in which H insulation class is required.

Characterists

VALUE
Standard colour Brick red
Manufactured diameters 0,5 mm - 16 mm
Tolerance on diameters + 0,3 /-0 mm
Dielectric strength 1.000 - 4.000 Volt
Insulation class H (180°C)


Notes: The information given in this data sheet are the results of careful researches and several tests carried out in our laboratory. Because of the various and particular applications, these information are merely indicative without our responsibility.