EPOXY GLASS PLATES
PLATES G10
G10 plates are realized using a glass cloth and a epoxy resin that give to the end-product high cold mechanical properties and very good high-tension resistance.
Characterists
| VALUE | |
|---|---|
| Colour | Green |
| Thickness | da 0,5 mm |
| Flexural strength | 450 N/mm². |
| Tensile strength | 350 N/mm². |
| 1 Min.Voltage Resistance (90°C/a+c) ┴ | >40 Kv |
| Dissipation factor-tan δ-1 MHz-D24-23) | 0,02 |
PLATES G11
The plates G11 are realized using a glass cloth and a epoxy resin that give to the end-product high cold mechanical properties and very good high-tension resistance.
Characterists
| VALUE | |
|---|---|
| Colour | Green |
| Thickness | da 0,5 mm |
| Flexural strength | 450 N/mm². |
| Tensile strength | 350 N/mm². |
| 1 Min. Voltage Resistance (90°C/a+c) ┴ | >40 Kv |
| Dissipation factor-tan δ-1 MHz-D24-23) | 0,02 (G11) - 0,019 (G11 cl.H) |
Notes: The information given in this data sheet are the results of careful researches and several tests carried out in our laboratory. Because of the various and particular applications, these information are merely indicative without our responsibility.